Friday, November 11, 2016

Basic safety guidelines on the playground and maintenance issues

Basic safety guidelines on the playground and maintenance issues - The information below should be used as a guide for the prevention of injuries related to game devices. However, it is believed that these recommendations, together with the technical information of the ASTM standards for public playgrounds, will contribute to greater safety in playgrounds.

What is a Public Playground?

A public playground refers to one to be used by children aged 6 months to 12 years in children's playgrounds, facilities, multi-family homes, parks, restaurants, resorts and schools.

Information about this item:

General safety instructions in the playground
Materials and surfaces for games
Identify the specific dangers of the playground and how to prevent this
Take the appropriate steps to maintain a playground and your equipment
The use of platforms, guard rails and protective barriers to minimize accidental falls

When setting up your playground there are 7 key factors:
  1. Accessibility: Surface material should allow access to equipment for children with disabilities.
  2. Age demarcation: Areas for different age groups should be separated by a buffer zone. This zone will reduce the possibility of injury to children with different levels of activity that interact with each other.
  3. Age group: Different farms are structured for different age groups. The safety requirements are different for each age group. Remember to buy the age group who use the playground and appropriately.
  4. Contradictory activities: The playground should be organized in sections to avoid injuries caused by overlapping activities. Be sure to place punches and carousels on a corner, side, or edge of a playing field. The slides should not be in a clogged area.
  5. Visibilities: Visual barriers should be minimized so that carers, parents, or supervisors can follow children's playgrounds. The seats, located around the outside of the structure, allow the spectators a place to sit in the sight of the children.
  6. Signs and / or Markings: Signs should be provided to give users instructions on the suitability of the device and the proper use of the device.
  7. Monitoring: Ensure that the operator is aware of the basic safety instructions.
When choosing a site for a playground there are several factors that are important to consider:
  • Travel to and from the playground: Is there any danger along the way? If so, delete the dangers.
  • Accessibility in the vicinity (traffic, water, steep hills, etc.): Can a child be accidentally or deliberately endangered? If so, make a method of keeping children on the playground (fence, hedge). Remember that the fence or the reporting should allow the observation of the supervisory authorities.
  • Exposure to the sun: Is the heat of the sun enough to heat metal parts, slides, platforms, steps or surfaces to burn children? Will the users be exposed to the sun during the heaviest part of the day? If this is the case, you should set it so that the bare metal is shaded. Give warnings that the computer will be warm in the sunlight. Look at the shading of the playground with a shadow structure.
  • Slope and drainage: Is loose filling material washed in the rain? If this is the case, pay attention to the correct drainage to avoid leaching.
When installing a playground, use equipment approved by the manufacturer. Follow the EXTREM instructions carefully or hire a terrace installer. Remember to keep all the manufacturer materials and start a careful record of all inspections and maintenance. Check the unit thoroughly before using it.

Wood:
  • Do not use creosote treated wood (rail poles, telephone masts, etc.) and coatings that contain pesticides.
  • Chromium Copper Arsenate (CCA) was an old chemical used to treat wood, including wood playgrounds. Since 2001 this treatment is no longer safe, it is known to corrode certain materials faster than others.
Metal:

Avoid using bare metal for platforms, films, or steps. In direct sunlight, bare metal can become extremely hot and cause contact damage. Use plastic-coated metal, plastic or wood. Cover the playground with a protection is always the best option. If the existing coating of bare metal or metal coated plastic, note:
  1. The manufacturer must ensure that users are not in a position to inhale, inhale or absorb potentially hazardous quantities of storage chemicals due to contact.
  2. All colors must meet the requirements of the CPSC (Consumer Product Safety Commission) for leaded glasses.
  3. Painted surfaces should be serviced regularly to avoid rust and corrosion.
Hardware:

Things to check with your hardware:
  • All fastening elements, connections and linings must not be removed without tools.
  • All exposed hardware should be soft to the user to avoid injury, penetration, or tissue entanglement.
  • The hardware in the movable joints must be secured against unintentional or impermissible loosening.
  • The entire hardware must be corrosion-resistant.
  • Bearings or bushings used in mobile joints must be lubricated or lubricated easily.
  • All S-hooks and C-hooks must be closed (no gaps or gaps greater than 0.04 ").
A reasonable playing area is one of the most important factors in reducing injuries that occur when children fall from the equipment. The surface under the playground equipment should be sufficiently soft and thick enough to soften the impact of the child's case. Grass and dirt are not recommended for surface material due to water and natural weathering that can occur at a drastic rate. There are two types of coating material: the uniform filler and the loose filler.

The unitary materials are generally rubber mats that are tested by ASTM or a spill-absorbed absorbent material. These types of surface options are ideal for young children and patios accessible for the disabled and are often more expensive than loose fill materials.

CCA-treated wood pulp, gravel or dirt are not acceptable forms of loose filling material.

Loose fill materials compress at least 25% over time due to wear, so it is a good idea to fill the range of use with more than the recommended fill level. For example, if your playground requires 9 inches of wood chips, then the first level should be 12 inches.

Suitable surfaces:

Any material tested according to ASTM F1292, including unit surfaces, wood material, etc.
Pea sauce
sand
Crushed / recycled rubber mulch
Wood pulp (not treated with CCA)
Wood chips

Inappropriate surfaces:

asphalt
carpet
concrete
dirt
weed
CCA treated wood

When choosing the toys, it is important that you keep in mind what the expected age group will be. Children of different ages and development stages have different needs and abilities. Playgrounds are designed to promote the imagination of a child as they develop new skills. If you choose a playground for a school or a public park, you should check the guidelines of your state for the integration of game structures that are accessible to the disabled in the playground.

Some devices are not recommended for public parks, including: trampolines, swinging doors, giant steps, climbing ropes not attached to both ends, rope swinging or heavy metal swinging. Devices such as platforms, offset platforms, railings and barriers, handrails and accessibility for the gaming machine have different guidelines for different age groups (preschool, preschool and school age). It is important to understand that handrails are not intended for small children as it is easy for them to creep.

It is easier for a child to climb than it is for them to come. Remember to have several methods to access and exit the game structure for different levels of ability to feel with the team.

There are 6 main categories of playground risk:
  1. Crushing and shearing points: crushing and shearing points can be produced by parts which move relative to one another or to a fixed part during a normal working cycle, for example with a rocker arm. To determine whether there is a crush or intersection: consider the probability that a child can get a part of the body in the point and the closing force around the point.
  2. Tangle and Impalement: Shoelaces on the hoods of jackets, sweatshirts and other upper-body garments can become entangled in game devices and can lead to death by strangulation. To avoid this, remove ropes, dog collars or similar items attached to the game devices and avoid equipment with ropes that are not attached to both ends. Projections on the gaming machines should not be able to involve children's clothing, nor should they be large enough to bend.
  3. Entrapment: The pinching of the head may occur first or head first. The apertures may present a risk of pinch when the distance between opposing inner surfaces is greater than 3.5 inches and less than 9 inches. Children can be caught by partially restricted openings, such as those made by two or more parts of the farm. To minimize the risk of capturing graded platforms, a fill must be used to reduce the space between tiered platforms.
  4. Sharp tips, corners, and edges: Any sharp edge or tip can cause serious injury. To avoid the risk of injury, make sure that the pieces of wood are smooth and not broken. All corners are rounded and all metal edges are rolled or have a round coating.
  5. Suspended hazards Suspended components should be located away from highly stressed areas of bright colors and should not tip over themselves.
  6. Shooting: Playgrounds must be free of tripping hazards, such as fast changes in height, anchoring devices and enclosing walls for loose surfaces.
All playgrounds must be tested for excessive wear, deterioration and potential hazards. For each team, the frequency of thorough inspections depends on the type and age of the appliance, the amount of use and the local climate. In order to ensure that your level remains sufficient and does not move, it should be regularly checked and, if necessary, returned to the right place. When inspecting loose paints, pay particular attention to areas under oscillations and to the exits of the slides to collect water on the surface of the mulch and the frozen surface.

Records of the following must always be kept:
  • Maintenance inspections
  • Repair
  • Accidents or injuries
The platforms should generally be shallow with openings that allow drainage. A staggered platform must have an access component when the difference between the platforms is 12 "for small children or 18" for students in the school age. Access to platforms that are more than 6 feet high (except for freestanding slides) should provide an interface between the foot to allow the child to pause and make a decision to move or find another way down.

Guard rails and barriers are used to minimize the likelihood of accidental falls from raised platforms, however; Protective barriers provide more protection for children. The guard rails should be high enough to protect the larger child from falling and so low that the smaller child can not run below it. No barriers are required if they impair the intended use of the appliance, such as a climbing frame.

Guards or guard rails may be provided in the following:
  1. Raised platforms
  2. Running tracks
  3. Landings
  4. stairway
  5. transition areas
There are several factors to consider when choosing the perfect playground for any outdoor area. The above information is the basic safety standards to help children to travel and play out of the playground, identify potential dangers near their playground, and what barriers in the unit interfere with the line of sight of childcare workers.

No comments:

Post a Comment